TECI

Hand crank winch for passenger transport The PLW is a combined passenger and load winch. It allows the transport of up to 300 kg of people or material. The personal load winch is used in combination with approved anchorage devices, belay devices and fall arrest/seat belts. It is used for safe and jerk-free access to containers by people. The belayer operates the PLW on the hand crank and thus the person to be secured is roped up and down. The hand crank is equipped with a load pressure brake and locks immediately when the crank is released. The security guard can also initiate a rescue immediately. Design and material: Winch made of stainless steel and plastic housing – stable and corrosion-resistant Stainless steel rope 6mm – extremely robust and durable One-hand carabiner made of stainless steel with fall indicator (drop indicator) – easy and safe handling Foldable hand crank made of stainless steel – extremely robust and easy to handle Advantages: Corrosion-resistant and resistant to environmental influences Safe operation thanks to innovative design Quick and easy installation on the anchorage devices Efficient work when transporting people and loads Certified as a machine in a complete system

The ROPSTOP III accompanies the user when climbing up and down and in the event of a fall it blocks the rope and catches the user safely. ROPSTOP III also has a manual blocking function and can therefore be clamped onto the kernmantel rope. This function is particularly useful when used as a restraint system. The ROPSTOP III is available in various versions: Steel oval carabiner with band energy absorber attached to the ROPSTOP III with a screw link Steel oval carabiner with a 35 cm band connector attached to the ROPSTOP III Steel oval carabiner with a 60 cm band connector attached to the ROPSTOP III The band energy absorber reduces the load on the human body to less than 600 kg (6 kN) in the event of a fall. If the ROPSTOP III is used with the "band connector" version, a separate band energy absorber must be installed in the system. The ROPSTOP III is approved in combination with the following kernmantel ropes in accordance with EN 353 - 2: Dynaflex 12 mm Tutor XG 12 mm Patron 12 mm The kernmantle ropes are made from the factory with end connections (sewn loop, sewn-in carabiner, end knot). Specification: Fall arrest device made of galvanized and gold-chromated steel To open, several independent steps must be carried out: 1. Open the safety bracket 2. Press the flap 3. Pull out the bolt 4. The ROPSTOP III can then be opened"

The FallSorb y-bungy is designed with a double-stranded lanyard made of elastic tape. Versions and material bungy: The bungy lanyard consists of an elastic textile band in black, it stretches out in use and shortens again when not in use, so it can be carried very compactly on the belt for transport. optionally, different carabiners can be installed at the factory there are also versions with an integrated swivel

The new Multigrip is a sharp-edge-tested, fixed fall arrester on a moving guide. It accompanies the user during ascent and descent and in the event of a fall, it locks onto the rope and catches the user safely. Thanks to the integrated energy absorber as a connection between the harness and the fall arrester, it can be attached to either the chest or back loop. The Multigrip is even ideally suited for horizontal applications. The product can also be used as a temporary horizontal lifeline system for 2 people. It is a ready-made system and requires no additional components.

The new Multigrip is a sharp-edge-tested, fixed fall arrester on a moving guide. It accompanies the user during ascent and descent and in the event of a fall, it locks onto the rope and catches the user safely. Thanks to the integrated energy absorber as a connection between the harness and the fall arrester, it can be attached to either the chest or back loop. The Multigrip is even ideally suited for horizontal applications. The product can also be used as a temporary horizontal lifeline system for 2 people. It is a ready-made system and requires no additional components.

The further development of the proven Energy Pro – the mast riser harness. It is designed for all users who place high demands on a belt. Our ENERGY PRO EVO is used for climbing lattice, wooden, catenary masts and for steel and industrial installations. It is now also used on fall arrest systems. Execution: Shoulder pads made of 3D mesh material with soft edging Lanyard storage: plastic material rings for transporting lanyards on the belt (target breaking point) - replaceable Chest eyelet made of galvanized steel ring - Extremely robust! COBRA buckle 45 mm on the chest eyelet and lap belt Multi-eyelet made of 2 robust textile loops (always combine both): 1. As seat belt eyelet: For workstation positioning on single ropes, for restraint systems or for abseiling and rescue manoeuvres 2. As an anti-fall eyelet: Approved as a fall arrest eye for fall arrest systems. COBRA-T buckle 25 mm in the leg loops Safety eye on the back made of forged aluminum D-ring, angled and foldable -Wide hip pad made of 3D mesh material with best padding Lateral retaining eyelets made of forged aluminium D-rings, angled and foldable Material loops made of reinforced kernmantle rope - load capacity per loop 25 kg Metal tool retaining eyelets on the lap belt for attaching tool bags, max. load capacity per ring 10 kg — Stitching of the webbing to the lap belt to be able to attach material carabiners such as Caritool

The tried-and-tested classic version of the Masteiger harness with additional Safe-Click buckle in the leg area. It is used for climbing lattice, wood, catenary masts and for steel and industrial installations. It is now also used on fall arrest systems. It is for all users who have high demands. Execution: Shoulder pads made of 3D mesh material with soft edging (removable) - Pleasantly soft in the neck and neck area 45 mm impregnated polyester webbing – flexible yet very robust Chest eyelet made of galvanized steel ring - extremely robust! Safe-Click buckle 45 mm as a belt closure on the chest eyelet, lap belt and in the leg area Seat belt eyelet made of 2 robust textile loops (always combine both) Lateral retaining eyelets made of forged aluminium D-rings, angled and foldable Hip pads made of 3D mesh material with padding - wearing comfort and air circulation Adjustment buckles made of aluminium coated black - easy to adjust and open! Leg pads made of 3D mesh material with padding - wearing comfort and air circulation Material loops made of reinforced kernmantle rope for transporting additional material and equipment, max. load capacity per loop 25 kg Metal tool retaining eyes on the lap belt for attaching tool bags, belt bags or individual equipment, max. load capacity per ring 10 kg

Fall arrest, holding, and seat harness for mast climbers The Volta is the classic among mast climber harnesses. It is used for climbing lattice, wooden, and overhead line masts, as well as for steel and industrial installations.

hoist rope The STRATOS® LIFT is the textile, lightweight hoist rope for cable cranes. Its unique design features a thermally pre-stretched UHMWPE core and an immensely abrasionresistant, coated UHMWPE cover. At 1/5th the weight of a conventional steel wire rope, this rope allows transporting a higher payload and makes work in difficult terrain much easier. Optimum spooling behavior and avoidance of injuries caused by protruding wires make this rope an ideal and safe working tool for forestry professionals.

HeatVulcanus is a heat resistant rope from Teufelberger and certified to EN 1891 B (9mm) and EN 1891 A (10,5mm). This rescue rope consists of a polyamide core and an aramid cover. Contrary to polyester and polyamide, aramids are highly heat resistant. What is more, these fibers exhibit excellent strength and only slight elongation at break. Vulcanus ideally complements our portfolio in that it features increased resistance to cutting and abrasion. In view of these properties, it is suited for use as a work rope or work positioning rope and equally well suited for work activities near heat sources and sharp edges. In view of its heat resistance, using it for several fast abseiling procedures in rapid succession is not a problem. Hence, it is also well suited for special intervention units, emergency response organizations, and for use in rescue operations. Vulcanus offers the following advantages: fully compatible with EN 1891 B (9mm) and EN 1891 A (10,5mm) high decomposition point (up to 500°C) high strength increased resistance to cutting and abrasion resistant rope

The high-strength fiber rope for lifting applications was developed specifically for use on tower, mobile and crawler cranes. The comparison to steel wire rope leaves no doubt. Teufelberger is the only rope specialist worldwide that is leading in both the wire rope and the fiber rope world. In a joint effort spanning several years, Teufelberger and Liebherr, one of the world’s leading crane manufacturers, developed soLITE ®, a ground breaking, innovative high-strength fiber rope for challenging lifting applications, especially for use on tower, mobile and cralwer cranes. Patented soLITE® construction soLITE® is a fiber rope featuring a unique, innovative and patented fiber-rope based steel wire rope construction. We designed soLITE® by using the best, extremely lighweight, high-strength synthetic fiber. The impressive result is a combination of the advantages of a high performance steel wire rope with those of a high-strength fiber rope.

Specifically designed to safely lift loads in intralogistics

Special calibrated rope for cutting marble and granite

Rope for nautical applications and corrosive environments, chemical industry, architecture applications.

Rope for nautical applications, corrosive environments, chemical industry, architecture applications.

Lay Direction: Right Hand Ordinary Lay / Left Hand Ordinary Lay Finish: Bright Rope grade: 1370 / 1770 N/mm² or 1570 N/mm² Standard: EN 12385-5 RCN: 06

Lay Direction: Right Hand Ordinary Lay / Left Hand Ordinary Lay Finish: Bright Rope grade: 1370 / 1770 N/mm² or 1570 N/mm² Standard: EN 12385-5 RCN: 04

Rope provide exactly to market requirements: OEM approved for several years High fexibility: FILLER construction improves bending capacities Reduced inner wire breaks: 8 uncompacted core strands increase flexibility of the core Improved permanent lubrication: PLASTFILL® impregnation leads to less wear in the core

Excellent absorption of shock loads due to eliminated king strand Extremly long lifetime: highest RCN number allows a big amount of outer wire breaks Four central strands reduce the risk damage of the rope core Improved permanent lubrication: PLASTFILL® impregnation leads to less wear in the core

Optimized absorption of shock loads, impacts and vibrations: no core protrusion due to its special steel core Outstanding bending fatigue resistance: enabled by uncompacted rope design Perfect fit on complex reeving systems: excellent resistance to short bending-cycles

High breaking strength Consistently reliable results over the time due to high compaction technology and plastic insert High stability against deflection angles Optimal balance between flexibility and strength Right combination of bending fatigue strength and solidity

Wire ropes class 6x19-6x36 with metallic core L = Nominal length of the sling, measured between the load-bearing points of the sling. The minimum length L of the sling is 50 times the wire rope diameter. The actual length of the product, measured without applied load, may differ from the nominal length considering the tolerance of two rope diameters or 1% of the nominal length, whichever is bigger. Used thimble type RL, other types available on request. On request the slings can be supplied RFID equipped.

Wire ropes class 6x19-6x36 with steel core. L = Nominal length of the sling, measured between the load-bearing points of the sling. The minimum length of the sling is 50 times the wire rope diameter. Used thimble type RL, other types available on request. On request the slings can be supplied RFID equipped. **Alloy steel hooks

Wire ropes class 6x19-6x36 with fiber core. L = Nominal length of the sling, measured between the load-bearing points of the sling. The minimum length of the sling is 33 times for RR/T type. The actual length of the product, measured without applied load, may differ from the nominal length considering the tolerance of two rope diameters or 1% of the nominal length, whichever is bigger. On request the slings can be supplied with cylindrical conical ferrule. Used thimble type RL, other types available on request. On request the slings can be supplied RFID equipped.

TWire ropes class 6x19-6x36 with fiber core. The minimum length L of the sling is 50 times the wire rope diameter for type AA/T and 33 times for RR/T type. On request the slings can be supplied with cylindrical conical ferrule. Used thimble type RL, other types available on request. L = Nominal length of the sling, measured between the load-bearing points of the sling. T he actual length of the product, measured without applied load, may differ from the nominal length considering the tolerance of two rope diameters or 1% of the nominal length, whichever is bigger. On request the slings can be supplied RFID equipped.

Wire Rope Lifting Sets for Offshore Containers, manufactured and certified in compliance with DNVGL-ST-E271 / ISO 10855-2 / EN 13414-1